The SaniSure® Cap2v8® one-piece molded tube and cap system provides for aseptic transfer, storage, and sampling within 50 mL, 500 mL, and 15 mL centrifuge tubes.
One piece Molded Cap Design
- Reduces contamination & product loss associated w/ barbed fittings
- Closed System protects product integrity
- Provides aseptic seal for high purity biologicals
Custom Design Capabilities With Standard Product Deliveries
- Fast turnaround on small lots and custom configurations
- Closure System can be used with various plastic tubes
- Custom tubing sizes, lengths, and accessories available
- Available individually packaged or as a component in an assembly
Material Variation Compatibility On Tubing and Caps
- PVC tubing (RF weldable/sealable) – Hytrel Cap
- C-Flex tubing (Heat weldable/sealable) – Polypropylene Cap
- PharMed tubing (Heat weldable/sealable) – Polypropylene Cap
Single Use
- Cost Effective
- Reduced assembly & installation time
- Eliminate cleaning validation
SaniSure® Cap2v8® 50mL Centrifuge Tube Design Options:
| Part Number |
Description |
Type of Tubing |
 |
| CAP2V8-50C-C-V-NG |
Cap Only, Non-Gamma |
PVC |
|
| CAP2V8-50C-A-V-NG |
Assembly, Non-Gamma |
PVC |
|
| CAP2V8-50C-C-V-GI |
Cap Only, Gamma Irradiated |
PVC |
|
| CAP2V8-50C-A-V-GI |
Assembly, Gamma Irradiated |
PVC |
|
| CAP2V8-50C-C-X-NG |
Cap Only, Non-Gamma |
C-Flex® |
|
| CAP2V8-50C-A-X-NG |
Assembly, Non-Gamma |
C-Flex® |
|
| CAP2V8-50C-C-X-GI |
Cap Only, Gamma Irradiated |
C-Flex® |
|
| CAP2V8-50C-A-X-GI |
Assembly, Gamma Irradiated |
C-Flex® |
|
| CAP2V8-50C-C-P-NG |
Cap Only, Non-Gamma |
PharMed® |
|
| CAP2V8-50C-A-P-NG |
Assembly, Non-Gamma |
PharMed® |
|
| CAP2V8-50C-C-P-GI |
Cap Only, Gamma Irradiated |
PharMed® |
|
| CAP2V8-50C-A-P-GI |
Assembly, Gamma Irradiated |
PharMed® |
|
|
 |
SaniSure® Cap2v8® 500mL Centrifuge Tube Design Options:
| Part Number |
Description |
Type of Tubing |
|
| CAP2V8-500C-C-V-NG |
Cap Only, Non-Gamma |
PVC |
|
| CAP2V8-500C-A-V-NG |
Assembly, Non-Gamma |
PVC |
|
| CAP2V8-500C-C-V-GI |
Cap Only, Gamma Irradiated |
PVC |
|
| CAP2V8-500C-A-V-GI |
Assembly, Gamma Irradiated |
PVC |
|
|
 |
Assembly (Typical) – Description:
- 1 - 50/500 mL CENTRIFUGE TUBE, POLYSTYRENE
- 1 - 2 PORT Cap2v8 Cap W/ 1/8" ID x 1/4" OD TUBING
- Vent Line - 3.0” OAL
- Transfer Line – 10.0” OAL
- 1 - 25 mm 0.2μm Hydrophobic Filter
Cap Only (Typical) – Description:
- 1 - 2 PORT Cap2v8 Cap W/ 1/8" ID x 1/4" OD TUBING
- Vent Line - 3.0” OAL
- Transfer Line – 10.0” OAL
Application(s):
- Transfer of biopharmaceutical products and reagents in a closed system
- Gas exchange transfer
- Sampling of biopharmaceutical products and reagents in a closed system
- Storage of biopharmaceutical products and reagents
- Use with benchtop, pilot plant, and production bioreactors
- Used with sterile connecting devices and thermal or RF tubing sealers
Sterilization:
- Autoclave – 15 psi @ 134°C, 60 min
- C-Flex® and PharMed® formulations only, PVC not recommended
- Irradiated assemblies can not be autoclaved
- Gamma Radiation– 25 kGy to 50 kGy